Mr. Md. Mahbubur Rahman | Green University of Bangladesh

Mr. Md. Mahbubur Rahman

Assistant Professor and Program Coordinator

M.Sc in Textile Engineering ( Dhaka University of Engineering & Technology or DUET)

B.Sc in Textile Engineering (PAU, Major in Wet Processing Technology)

 

1. Green University of Bangladesh

Assistant Professor

20th May 2022 to till now

Department of Textile Engineering

2. Green University of Bangladesh

Senior Lecturer

23rd January 2016 to 19th May 2022

Department of Textile Engineering

3. Green University of Bangladesh

Lecturer

24th May 2011 to 22nd January 2016

Department of Textile Engineering

4. Wisteria Textile LTD.

Production Officer (Dyeing)

June 2010 to May 2011

Journal Paper: 

  1.   Md. Mahbubur Rahman*, Md. Mazharul Helal, Suraiya Ireen, Md. Mutasim Uddin, Dr. Jagannath Biswas, “Evaluation of Enzyme Wash on Denim Fabric by Varying Conditions and Chemical Composition”, International Journal of Textile Science, USA, Vol. 12, Issue 1, pp. 10-14, 23 April 2023. DOI:10.5923/j.textile.20231201.02, ISSN: 2325-0119. [IF=0.861]  

  2. Md. Mahbubur Rahman*, Md. Mutasim Uddin, Md. Monir Hossan, Md. Mazharul Helal, Suraiya Ireen, Dr. Jagannath Biswas “Effect of Varying Concentration of Soda Ash on Fastness Properties of Reactive Dyed Cotton Fabric” International Journal of Composite Materials, Vol. 12, Issue 1, pp. 10-16, 24 September 2022, USA. DOI: 10.5923/j.cmaterials.20221201.02, ISSN: 2166-4919        (IF=  0.861).

  3. Md. Mazharul Helal, Md Mutasim Uddin, Md. Mahbubur Rahman and Md. Shariful Alam, “The Impact of Neutral Enzyme on Jute-Cotton Blended Denim Fabric”, GUB Journal of Science and Engineering (GUBJSE), Vol. 8, Issue 01, pp. 24-28, ISSN: 2409-0476, DOI: https://doi.org/10.3329/gubjse.v8i1.62328,  November 2022.   

  4. Avijeet Datta, Md Mutasim uddiin, Md. Mahbubur Rahman and Md. Mazharul Helal, “The Benefits of using Computerized system over Manual System in Apparel Production”, GUB Journal of Science and Engineering (GUBJSE), Vol. 8, Issue 01, pp. 36-40, ISSN: 2409-0476, DOI:https://doi.org/10.3329/gubjse.v8i1.62330,  November 2022.   

  5. MD. Monir Hossan1, Md. Mahbubur Rahman1, Md. Touhidul Islam1*, Mr. Mohammad Ashraful Alam2, Tanvir Mahmud3 and MD. Yamin Al Kakon4 “Evaluation & Analysis of Splice Strength of Ring Spun Yarn Produced from Different Types of Cotton Fibers” Journal of Textile Science & Engineering, Vol. 11, Issue 6, 24 June 2021, ISSN: 2165-8064.
  6. Md. Mahbubur Rahman1, Mohammad Ashraful Alam2, Md. Mazharul Helal1, Jagannath Biswas1, and Ismail Chowdhury1 “Consumer Perception towards Visual Merchandising in Apparel Retailing” “International Journal of Innovation and Applied Studies (IJIAS)”, Morocco, Vol. 33, Issue 1, pp. 17-22, June 2021. (IF= 0.786).
  7. Mohammad Ashraful Alam, Md. Mahbubur Rahman, Md. Shariful Alam and Suraiya Ireen “Influence of 3D CAD in Apparel Industry as a Prominent Tool for Checking Garment Fitting”, “International Journal of Innovation and Applied Studies (IJIAS)”, Morocco, Vol. 30, Issue 4, pp  791-796, October 2020. (IF= 0.786).
  8. Md. Mahbubur Rahman1, Suraiya Ireen2, Jagannath Biswas3, and Md. Shariful Alam4 “Effects of Different Mordants Used in Turmeric Dyeing with Cotton Fabric”, “International Journal of Innovation and Applied Studies (IJIAS)”, Morocco, Vol. 29, Issue 4, pp  1184-1188, July 2020. (IF= 0.786).
  9. Suraiya Ireen and Md. Mahbubur Rahman, “Comparative Study on Different Physical Properties of Grey and Finished Single Jersey Derivatives”, GUB Journal of Science and Engineering (GUBJSE), Volume 05, Issue 01, pp. 06-10, ISSN: 2409-0476, 19 November 2019.
  10. Md. Mahbubur Rahman¹ and Jagannath Bishwas2, “Effects of Salt in Dyeing of Jute Fabric with Reactive and Basic Dye”, International Journal of Latest Trends in Engineering and Technology, Vol. (13), Issue (3), pp.039-043, e-ISSN:2278-621X, May 2019, DOI : http://dx.doi.org/10.21172/1.133.06 [IF: 0.899].
  11. Mr. Md. Mahbubur Rahman¹, Md Mutasim Uddin², Farah Amreen3, Suraiya Ireen⁴, Dr. Jagannath Bishwas⁵, “Effects and evaluation of color fastness of different mordants on knit fabric dyed with onion outer skin”, Iconic Research And Engineering Journals (IRE), International Peer-Reviewed Journal, Vol. 2, Issue 5, ISSN: 2456 – 8880, Nov 2018.
  12. Mahbubur Rahman, Azizul Islam, Jagannath Biswas, “Effects of Water Hardness on Dyeing of Cotton Fabrics with Different Types of Reactive Dyes and Shade Percentages”, International Journal of Materials Science and Applications (IJMSA),  Vol. 5, No. 6, 2016, pp. 254–260, ISSN: 2327-2635, DOI: 10.11648/j.ijmsa.20160506.14, October 27, 2016.
  13. Azizul Islam1, Rashaduzzaman1, Mahbubur Rahman1, Jagannath Biswas1, Elias Khalil2, “A Study on the Effects of Material to Liquor Ratio on the Colorfastness of Synolon Yellow EXW Fluorescent Disperse Dye”, International Journal of Materials Science and Applications (IJMSA), Vol. 5, No. 6, 2016, pp. 248-253, ISSN: 2327-2635, DOI: 10.11648/j.ijmsa.20160506.13   October 20, 2016.
  14. Farah Amreen Lamiya, Israt Jahan, Md. Mahbubur Rahman & Shifat Ahamed Tonmoy, “Effects of Different Stitches on Weft Knitted Fabric Width”, GUB Journal of Science and Engineering (GUBJSE), Vol. 3, Issue 01, pp. 97-109, ISSN: 2409-0476, December 2016.

  15. 1.      S.M. Zahirul Islam, Md. Nakib-Ul-Hasan, Md. Moshiur Rahman, Md. Khalilur Rahman, Md, Azizul Islam & Md. Mahbubur Rahman, “Qualitative Analysis and Comparative Study of Single Jersey, Rib and Interlock Fabric with Identical Yarn Count and Stitch Length”, GUB Journal of Science and Engineering (GUBJSE), Vol. 3,Issue 01, pp. 47-54, ISSN: 2409-0476, December 2016.

  16. 1.  Md. Mahbubur Rahman1, Md. Rashaduzzaman, Md. Mostafa Zaman and Jagannath Biswas, “ Effects of salt on dyeing of cotton fabric with different types of Reactive Dyes” GUB Journal of Science and Engineering (GUBJSE), vol. 2, issue 1, pp 53-57, ISSN: 2409-0476, January 2015.

  17. 1.   Md. Rashaduzzaman1, Md. Mahbubur Rahman, Md. Mostafa Zaman and Jagannath Biswas, “A study on the effects of dispersing agent concentrations on the colorfastness of Synolon Yellow EXW fluorescent Disperse Dye” GUB Journal of Science and Engineering (GUBJSE), vol. 2, issue 1, pp 45-52, ISSN: 2409-0476, January 2015.

  18. Md. Rashaduzzaman, Md. Mahbubur Rahman & J. Biswas, “Techno-economically viable textile wastewater treatment by bio-electrical common effluent treatment plant”,GUB Journal of Science and Engineering (GUBJSE), vol. 1, pp 65-71, 2014.

Conference Paper:

  1. Md. Kaikobad1, *, Md. Omar Faruque1, Mehnaz Jebin1, Suraiya Ireen1, and Md. Mahbubur Rahman1, “Effect of Elastane on Physical Properties of Double Jersey Knit Fabric for Active Wear,” 2022 4th International Conference on Sustainable Technologies for Industry 4.0 (STI), 17-18 December 2022, Dhaka.
  2. Mehnaz Jebin1*, Md. Mazharul Helal1, Md. Kaikobad1, *, Md Mutasim Uddin1 and Md. Mahbubur Rahman1, “ Performance Analysis of Lean Tools Implementation in Garment Industry: A Case Study,”  2022 4th International Conference on Sustainable Technologies for Industry 4.0 (STI), 17-18 December 2022, Dhaka.
  3. Nusrat Jahan Mousumi*Md. Mohinuddin, Md Mutasim Uddin, Mohammad Shariful Alam, Jagannath Biswas, Md. Mahbubur Rahman,” Removal of azo dye from Textile effluent by activated charcoal extracted from jute stick,” 2022 4th International Conference on Sustainable Technologies for Industry 4.0 (STI), 17-18 December 2022, Dhaka.
  4. Avijeet Datta, Md Mustasim Uddin, Md. Mahbubur Rahman and Md Mazharul Helal, “Advantages of using CAD/CAM system over Manual System in Apparel Production”, 3rd International Conference on Sustainable Technologies for Industry 4.0 (STI), 18-19 December, 2021, Dhaka
  5. Md. Mazharul Helal, Md. Mahbubur Rahman, Md Mutasim Uddin, Md. Shariful Alam and Dilshat Rubia Dola, “Analyzing the Effect of Neutral Enzyme on Jute-Cotton Blended Denim Fabric”, 3rd International Conference on Sustainable Technologies for Industry 4.0 (STI), 18-19 December, 2021, Dhaka
  6. Jannat Jahan Joya, Md Mutasim Uddin, Md. Mahbubur Rahman and Md. Mazharul Helal, “Trend Analysis of Garments Printed Products among European and North American Consumers”, 3rd International Conference on Sustainable Technologies for Industry 4.0 (STI), 18-19 December, 2021, Dhaka
  7. MD. Monir Hossan, Md. Touhidul Islam, Md. Mahbubur Rahman and MD. Fahim Bin Alam, “Analyzing The Effect of Linear Density (Ne) on the Characteristics of CVC (90:10) Mélange Yarn”, 3rd International Conference on Sustainable Technologies for Industry 4.0 (STI), 18-19 December, 2021, Dhaka
  8. Md. Mutasim Uddin, Md. Mahbubur Rahman, Md. Mazharul Helal and Dr. Md. Shariful Alam “Investigation on Color Fastness Properties of Different Styles of Printing Available in Bangladesh”, 2nd International Conference on Sustainable Technologies for Industry 4.0 (STI), 19-20 December, 2020, Dhaka.

 

9. Md. Mazharul Helal, Md. Mahbubur Rahman, Md. Mutasim Uddin and Mohammad Ashraful Alam, “Generating Mélange Effect on Cotton Polyester Blended Fabric in a Cost Effective Manner”, 2nd International Conference on Sustainable Technologies for Industry 4.0 (STI), 19-20 December, 2020, Dhaka.

10.  Md. Faisal Mahmud, Md. Mahbubur Rahman,  Mohammad Ashraful Alam and Ms. Suraiya Ireen “Effect of sheath count of cotton/spandex core spun yarns on the physical properties of woven denim fabrics”, 2nd International Conference on Sustainable Technologies for Industry 4.0 (STI), 19-20 December, 2020,  Dhaka .

11.  Dr. Mohammad Shariful Alam, Dr. Jagannath Biswas and Md. Mahbubur Rahman “Synthesis of a Novel Building block Benzothiazolyl sulfone for developing modified Stereoselective Norbixin”, 2nd International Conference on Sustainable Technologies for Industry 4.0 (STI), 19-20 December, 2020, Dhaka.

12.  Md. Mahbubur Rahman1, Md. Mutasim Uddin2 and Dr. Jagannath Biswas3, “Salt Free Dyeing of Cotton Fabric with Reactive Dyes by Using Cationic Fixing Agent”, International Conference on Sustainable Technology for Industry 4.0 (STI 2019), 24-25 December 2019

13. “International Conference on Human Values in Higher Education (8th ICHVHE – 2019)”1-3 March, 2019, IIT (BHU), Varanasi, India.

14. Conference on “Bringing Change in the Manufacturing Industry Through Best  Practices” Organized by LIZ Fashion Industry Limited, Gazipur, 29th July, 2016

 

 

 

 

 

 

Achievements:

Research Grants/Award:

1.       Received Research Grant (50,000 TK.) from CRIT, GUB (2019) and the Research title is “Effect of Soda ash on dyeing of cotton fabric with different types of reactive dyes”.

2.      Received Research Grant (50,000 TK.) from CRIT, GUB (2019) and the Research title is “Scope of Enzyme Wash on Jute Cotton Blended Denim Fabric”.

3.      Received Research Grant (87,000 TK.) from CRIT, GUB (2021) and the Research title is “An Alternative Approach of Eco-Friendly Reactive Dyeing of Cotton Fabric”.

4.      Received Silver Award from GUB Research Exhibition (GEX 2021), CRIT, GUB (2021) and the Research title is “Scalable Coating Process of AgNPs silicone on Cotton Fabric for Developing Hydrophobic and Antimicrobial Properties”.

5.      Received Gold Award from International Exhibition ‘RICES 2021’, MMU, Malaysia and the Research title is “Scalable Coating Process of AgNPs silicone on Cotton Fabric for Developing Hydrophobic and Antimicrobial Properties”.

6.      Received Champion Trophy from Chess Tournament (TEX FEST 2020, Textile Department), GUB, 2020.

     Professional Memberships:

      1. General Member of ITET (Institution of Textile Engineers and Technologists).

      2. General Member of ATET (Association of Textile Engineers & Technologists, Bangladesh)

  Extra-Curricular Activities:

      1. Head, Self-Assessment Committee of Green University of Bangladesh (SAC–GUB), Department of Textile Engineering, Institutional Quality Assurance Cell (IQAC).

2.      Program Coordinator of Textile Engineering Department.

3.      Member of Curriculum Committee of Textile Engineering Department.

4.      Member of OBE Implementation and BAETE Certification Committee.

5.      Member of Project and Internship Coordination Committee

6.      Member secretary of technical evaluation committee for purchasing textile lab equipment’s.

7.      Member of IEB Accreditation Committee of the Textile Engineering Department.

8.     Member of Question Moderation Committee of the Textile Engineering Department.

9.      Member of Credit Equivalence Committee of the Textile Engineering Department.

10.  Member of Text Fest Organizing Committee.

11.   Member of Exam Invigilation Committee.

12.  Member of Alumni Association Committee.

13.  Member of Departmental Career Counselling Committee.

14.  Involved in blood donating activities.

15. Distributing warm clothes in severe cold-stricken area.

Roles in GUB Event:

  1. Member of Finance & Sponsorship Committee (STI 4.0, 2019)
  2. Member of Finance & Sponsorship Committee (STI 4.0, 2020)
  3. Member of Finance & Sponsorship Committee (STI 4.0, 2021)
  4. Member of Finance & Sponsorship Committee (STI 4.0, 2022)
  5. Member of Sub Committee for Discipline and Medical Aid (2nd Convocation of GUB)
  6. Member of Sub Committee for Gown and Cap (3rd Convocation of GUB)
  7. Member of Sub Committee for Convocation Venue, Transportation, Logistics, Common Gifts and Printing (4th Convocation of GUB)

     Workshop Participated:

  1. Workshop on “Interactive Teaching and learning.” [Prof.  Dr. Md. Golam Samdani Fakir, VC, GUB], Green University of Bangladesh, 15th June 2013.
  2. Workshop on “The Art of Questioning and Grading of Students Performance for Ensuring Effective Teaching and Learning.” Organized by Green University Center of Excellence for Teaching and Learning (GUCETL), [Prof.  Dr. Md. Golam Samdani Fakir, VC, GUB], Green University of Bangladesh, 14 August 2013.
  3. Workshop on “Learner-Centered Syllabus Writing”, Organized by Green University Center of Excellence for Teaching and Learning (GUCETL), 7 September 2013.
  4. Workshop on “Strengthening Presentation Skills.” Organized by Green University Center of Excellence for Teaching and Learning (GUCETL),  [Prof.  Dr. Md. Golam Samdani Fakir, VC, GUB], Green University of Bangladesh, 21 September 2013.
  5. Workshop on ‘‘Research Proposal Writing.’’ Organized by Green University Center of Excellence for Teaching and Learning (GUCETL), [Prof.  Dr. Md. Golam Samdani Fakir, VC, GUB], Green University of Bangladesh, 25 November 2013.
  6. Workshop on “Guidelines for Self-Assessment at Program Level”, Organized by QA unit, UGC and GUB, 16 June 2016.
  7. Workshop on “Sampling Data Collection and Analysis”, Organized by Institutional Quality Assurance Cell (IQAC), GUB, 22 October 2016
  8. Workshop on “Standard Curriculum Format: Implication for Departments of GUB”, Organized by Institutional Quality Assurance Cell (IQAC), GUB, [Prof. Dr. M. Mozahar Ali, Director, GTI, BAU], Green University of Bangladesh, 14th February 2017.
  9. Workshop on “Data Management, SA report writing & Post Self-Assessment Improvement Plan”, Organized by Institutional Quality Assurance Cell (IQAC), GUB, 15th May, 2017.
  10. Workshop on “Organizational Performance at GUB: Exploring the Role of Values and Culture”, Organized by Green University Center of Excellence for Teaching and Learning (GUCETL), GUB, 22 May 2017.
  11. Workshop on “The Art of the Formulating Quality Questions based on Bloom Taxonomy”, Organized by Institutional Quality Assurance Cell (IQAC) and GUCETL, GUB, 20 July 2017.
  12. Workshop on “Training on Financial Management of GUB”, Organized by Institutional Quality Assurance Cell (IQAC), GUB, 31 October 2017.
  13. Workshop on “Self-Assessment Report Writing”, Organized by Institutional Quality Assurance Cell (IQAC), GUB, 19 March 2018.
  14. Attended to the workshop at IEB titled “Hands-on Orientation on Outcome-based Education (OBE)” Organized by BAETE, conducted by Prof. Siti Hawa Hamzah, Associate Director of Board of Engineering Malaysia on 19th June 2019.
  15.  Workshop on “Research in Higher Studies and Writing for Journals” Organized by Center for Research Innovation and Transformation (CRiT), Green University of Bangladesh, facilitated by Dr. Mahdy Rahman Chowdhury, Associate Professor, Department of Electrical and Computer Engineering, North South University, Dhaka, Bangladesh. 11 December 2019.
  16. Attended to the training session at Green University of Bangladesh titled ‘Online Teaching-Learning’ on 22-24 June 2020, Organized by Center of Excellence for Teaching (CETL), Green University of Bangladesh Via Online.
  17. The Certificate course in e-learning and Teaching (CeLT), an initiative of the Foundation for Learning, Teaching and Research (fLTR), Organized by GUB, 20 Nov – 05 Dec, 2020
  18. Workshop on “Togetherness for High Performance at GUB: Roles of Values and Culture” Organized by Green University of Bangladesh, 27th February, 2021, Facilitator by Prof.  Dr. Md. Golam Samdani Fakir, VC, GUB.
  19. Workshop on “Assessment Strategies for Online Examination”, Organized by Center of Excellence for Teaching and Learning (CETL), GUB, 16th March 2021.
  20. Workshop for “Developing the quality of online learning for students”, Organized by Center of Excellence for Teaching and Learning (CETL), GUB, 12th April, 2021
  21. Workshop on “Avoiding Plagiarism”, Organized by Center of Excellence for Teaching and Learning (CETL), GUB, 19th April 2021.
  22. Workshop on “Writing Academic Papers”, Organized by Center of Excellence for Teaching and Learning (CETL), GUB, 26th April 2021.
  23. Workshop on “Green Assembly on Auto Proctor  implementation on GUB”, Organized by Center of Excellence for Teaching and Learning (CETL), GUB, 3rd  July 2021.
  24. Workshop on “Future of Synthetic fibres in India”, Organized by SVKM’S NMIMS, Mukesh Patel School of Technology Management & Engineering, Centre for Textile Functions (CTF), Shirpur, India, 30th March 2022.
  25. Workshop on “Weft Knitting Technology – Current Scenario”, Organized by SVKM’S, NMIMS, MPSTME, Centre for Textile Functions (CTF) Shirpur, India, 28th April 2022.

Industrial Training:

  1. Training on Effluent Treatment Plant.
  2. Training on Fire Fighting & Fire Evacuation.
  3. Training on Water Treatment Plant.
  4. Training on Industrial Engineering.
  5. Training on Final inspection and trouble shooting.
  6. Training on Computer Aided Design.
  7. Training on Supplier Chemical Management.